|
ISA SLOTS
Provides six ISA Bus slots for the
use of standard ISA Bus option cards.
PCI LOCAL BUS SLOTS
Provides six PCI Local Bus slots for
the use of standard PCI Local Bus option cards.
CPU SLOT
Accepts a PCI Industrial Computer
Manufacturers Group (PICMG) 2.0 compliant processor.
PRINTED CIRCUIT LAYERS
The backplane is a six-layer .062"
thick board. Three signal layers, +5 voltage layer,
+3.3 voltage layer and ground layer. Multi-layer construction
provides excellent noise immunity.
POWER CONNECTORS
The standard AT power connection is
available through a 12-pin AT-style connector. Power
connection for +3.3V is available through a 12-pin AT-style
connector or an ATX connector (optional).
|
KEYBOARD CONNECTORS
Three keyboard connectors: two are
5-pin headers and one is a standard AT 5-pin DIN connector.
These connections provide options for front or rear
mounted keyboard connectors.
AUXILIARY POWER CONNECTOR
Additional power capacity is available
through a 6-pin AT-style connector.
POWER INDICATORS
The power indicators provide a convenient
visual check for +5V, -5V, +12V, -12V and +3.3V power
connections.
PCI-TO-PCI BRIDGE
The PCI-to-PCI bridge supports the
PCI 2.1 specification. This bridge allows PCI Local
Buses to extend the electrical loading limits of a single
PCI Bus and to operate independently, allowing for communication
within the same bus even if the other PCI Buses are
busy. The BP7/6T-2.1 backplane has bus mastering capabilities
on all six PCI Local Bus slots.
|
