rackmount pc homerack mount computercustom industrial computersrackmount chassis productsindustrial computer infoindustrial pc contact




 


Home > Rackmount Computers> F5 Rackmount Computer Chassis

rackmount pc computers


    F5 Series 1U


  • Very Short for a 1U chassis
  • 1U x 20.5 inch depth design
  • Two cooling fans
  • Optional third cooling fan
  • ATX motherboard
  • One I/O card slot
  • Various power options
  • Custom paint and logo available
  • Integrated System Offered
C5 4U Rackmount Case
Additional Photos


The F5 Series chassis is a high performance design in a low cost 1U rackmount enclosure. Feature rich, the F5 Series is a solid, robust design which will meet the most rigorous and demanding requirements. This chassis is ideal for high density server applications including collocation.

The enclosure is constructed of 18 gauge steel, clear zinc plated for corrosion protection and an attractive appearance. The front panel is attractively detailed and is of heavier gauge than the chassis.

There is more than ample drive storage. Two drives configurations are possible. One configuration allows one external 5.25 inch drive, external 3.5 inch drive, two internal 3.5 inch drives and an internal 2.5 inch hard drive.

The other configuration allows for two external 5.25 inch drives and one external 3.5 inch drive plus an internal 2.5 inch drive. The 2.5 inch drive location is ideal for solid state flash devices.

A door covers and protects the drives. Accessible behind the door is the power and reset switches as well as the power-on and drive activity LED's. The LED's are visible through the door when it is closed.

Cooling is provided by two fans with a third fan optional. The fans provide tach signals for failure detection by the motherboard.

The F5 Chassis provides for mounting a standard ATX motherboard up to 9.6 x 12-inches. One plug-in card can be installed using the included riser card.


Downloadable PDF files
  F5 Datasheet F5 (ATX) Drawing

Highlights

Dimensions

19" (wide) x 1U (1.7") (high) x 20.5" (deep)
Weight - 17 lbs / 8 kgs

Drive Capacity

One 5-1/4 inch drive - front accessible
One 3-1/2 inch drive - front accessible
Two 3-1/2 inch drives -internal
One 2-1/2 inch drive - internal

- or -

Two 5-1/4 inch drives - front accessible
One 3-1/2 inch drive - front accessible
One 2-1/2 inch drive - internal

Front Panel Controls

Power switch - Black momentary rocker with 2 position .100 header for board connection
Reset switch - hidden pushbutton with 2 position .100 header for board connection
Power LED - green with 3 position .100 header for board connection
Drive Activity - Red with 2 position .100 header for board connection
Switch and LED connectors are labeled at the connector end.

Rear Panel Details

1 Plug-in card slot
ATX I/O Shield

Cooling

Two 40mm 8.9CFM fans with tach signal
Negative chassis pressure
Optional additional 40mm fan

Power Supply

Not included.
AC Input - Zippy P1G form factor.
Optional 12, 24 or 48VDC supplies available

Motherboard Mounting

Standard 9.6 x 12 inch ATX motherboard
Motherboard adapter plate accommodates any motherboard

Plug-in I/O Cards

Accommodates one plug-in I/O card
Includes 32-bit standard 5V PCI riser card

Chassis Plans is more than a chassis supplier. We offer a complete product line including the latest motherboards, drives, video boards and plug-in cards including analog/digital I/O cards. Integrating today's complex systems can be a challenge. Allow us to provide you with a professionally integrated system with the OS loaded and the system tested and burned-in as a complete unit. We stand behind our work 100%.
 
 

Chassis Plans LLC. 8295 Aero Place, Suite 200 San Diego CA 92123
858-571-4330 Fax 858-571-6146 e-mail salesteam@industrial-computer-source.com
Chassis Plans
Single Board Computers
Rackmount Computers
Single Board Computers