The E6000 Series chassis is a high performance
design in a low cost 2U rackmount enclosure.
Feature rich, the E6000 Series is a
solid, robust design which will meet
the most rigorous and demanding requirements.
This chassis is ideal for high density
I/O intensive applications.
The enclosure
is constructed of 18 gauge steel, clear
zinc plated for corrosion protection
and an attractive appearance. The front
panel is attractively detailed and is
of heavier gauge than the chassis.
The E6000 provides
for one externally accessible 5-1/4
inch, one external 3-1/2 inch and two
internal 3-1/2 inch drive bays.
The chassis is
cooled by two 80mm 42CFM ball bearing
fans. Air flow is in through a front
mounted air filter. The fans are mounted
at to front panel to provide positive
chassis pressure.
A door covers and
protects the drives. Accessible behind
the door is the power and reset switches
as well as the power-on and drive activity
LED's. The LED's are visible through
the door when it is closed.
The E6000 Chassis
provides for mounting a six slot passive
backplane. The rear panel supports six
plug-in cards. The backplane is not
included in the chassis and a variety
of backplanes are available.
19" (wide)
x 2U (3.5") (high) x 20.7" (deep)
Weight - 14.6 lbs / 32.1 kgs
Drive Capacity
One 5-1/4 inch drive - front accessible
One 3-1/2 inch drive - front accessible
Two 3-1/2 inch drives - internally mounted
Front Panel Controls
Power switch
Reset switch
Power LED
Drive Activity LED
AT Keyboard Port
Rear Panel Details
6 Plug-in card slots
Cooling
Four 80mm 42CFM fans
Fans are mounted mid-chassis to assist with
drive cooling
Thermal Management
Board
Monitors
the following chassis parameters. Audible
alarm sounded on system failure. Rear
panel mounted terminal block for NO/NC
contact closure for external alarm.
Fan
operation
Chassis
over-temperature settable for 40,
50, 60 deg C alarm point
Two
remote chassis temperature probes.
Power
supply operation
Front
panel indication of system alarm status
Power Supply
Not included.
Accepts standard PS/2 style supply
Optional 12, 24 or 48VDC supplies available
Motherboard Mounting
Standard EATX 12 x 13-inch motherboard
Motherboard adapter plate accommodates any
motherboard
Plug-in I/O Cards
Accommodates
three plug-in I/O cards
Full length cards supported
Includes 3-slot 32-bit standard 5V PCI riser
card
Chassis Plans is more than a chassis
supplier. We offer a complete product
line including the latest motherboards,
drives, video boards and plug-in cards
including analog/digital I/O cards.
Integrating today's complex systems
can be a challenge. Allow us to provide
you with a professionally integrated
system with the OS loaded and the system
tested and burned-in as a complete unit.
We stand behind our work 100%.
