D4 Series 3U 3U x 15.7 inch depth design One 5-1/4 inch front drive bay Two 3-1/2 inch internal drives Three 90mm cooling fans Two 40mm exhaust fans One 60mm exhaust fan ATX motherboard Six I/O card slots Various power options Custom paint and logo available Integrated System Offered

Additional Photos

The D4 Series chassis is a medium performance design in a low cost 3U rackmount enclosure. The D4 Series is a solid, robust design which will meet the most rigorous and demanding requirements. This chassis is simple in design and is ideal for low cost internet appliance or dedicated controller application. This is your basic no frills 3U chassis. The enclosure is constructed of 18 gauge steel, clear zinc plated for corrosion protection and an attractive appearance. The front panel is attractively detailed and is of heavier gauge than the chassis. The D4 provides one externally accessible 5-1/4 inch drive bay that can be populated with a standard half-height 5-1/4 inch device or a combination slim CD / slim floppy drive.

The front panel is flat with no door or filter. Front panel LED indicators include power and drive activity. The power and reset switches are on the rear panel. Cooling is provided by three 90mm 51CFM hot swap fans blowing into the chassis plus two 40mm and one 60mm exhaust fans. There is no air filter. The D4 Chassis provides for mounting a standard ATX motherboard up to 9.6 x 12 inches. Six plug-in cards can be installed. Power is provided by a 2U style power supply. Several power options are available including DC operation.

Downloadable PDF files

D4 Datasheet

D4 (ATX) Drawing

Highlights

Dimensions

19" (wide) x 3U (5.20") (high) x 15.7" (deep)

Drive Capacity

One 5-1/4 inch drives - front accessible
Two 3-1/2 inch drive - internal

Front Panel Controls

Power LED - green with 3 position .100 header for board connection
Drive activity - red with 2 position .100 header for board connection

Rear Panel Details

Power Switch
Reset Switch
6 Plug-in card slot
ATX I/O Shield
One DB25 connector knockout
One SCSI connector knockout

Cooling

Three 90mm 51CFM cooling fans
Two 40mm 7CFM exhaust fans
One 60mm 22CFM exhaust fan

Power Supply

Rear Mount 2U style
AC supply - Zippy P2U or P2G form factor
DC supply - D2U form factor (48VDC only available)
Power supply not included.

Motherboard Mounting

Standard 9.6 x 12 inch ATX motherboard
Motherboard adapter plate accommodates any motherboard

Plug-in I/O Cards

Accommodates six plug-in I/O cards

Integration Services Chassis Plans is more than a chassis supplier. We offer a complete product line including the latest motherboards, drives, video boards and plug-in cards including analog/digital I/O cards. Integrating today's complex systems can be a challenge. Allow us to provide you with a professionally integrated system with the OS loaded and the system tested and burned-in as a complete unit. We stand behind our work 100%.