The C9000 Series chassis is an ideal platform
for the new SWTX (16 x 13-inch) motherboards
allowing quad XEON and up to 32GB of
memory in a high performance in a low
cost 4U rackmount enclosure. Feature
rich, the C9000 Series is a solid, robust
design which will meet the most rigorous
and demanding requirements.
The enclosure
is constructed of 18 gauge steel, clear
zinc plated for corrosion protection
and an attractive appearance. The front
panel is attractively detailed and is
of heavier gauge than the chassis.
The chassis provides
for three 5.25-inch drives and one 3.5-inch
drive, all front accessible. Various
drive adapters are available to allow
hot-swap IDE and SCSI drive configurations.
The power supply
is a front mounted redundant supply.
A full width lockable
door covers and protects the drives.
Accessible behind the door is the power
and reset switches. The drive and alarm
LED's are mounted on the door.
A full width filter
is provided behind the door and is easily
accessed for cleaning. Cooling is provided
by four 90mm 51CFM hot swap fans.
An alarm status
board monitors fan operation and chassis
temperature. An alarm is sounded and
contact closure is available for an
alarmed state.
The C9000 Chassis
accepts a 20-slot passive backplane.
An innovative card hold-down mechanism
assures cards stay seated in high-G
environments such as shipping.
Three horizontal 5-1/4 inch half height
drives - front accessible
One horizontal 3-1/2 inch x 1 inch drive
- front accessible
The drive cages are suspended on anti-vibration
mounts.
Front Panel Controls
Power
switch - large black momentary with 2 position
.100 header for board connection
Reset switch - small black momentary with
2 position .100 header for board connection*
Power Supply Alarm - small black momentary
with 2 position .100 header
Power - green LED with 3 position .100 header
for board connection
Drive Activity - two green LED's with 2 position
.100 header for board connection
Fan Status - two green LED's
System Fault - green LED
Switch and LED connectors are labeled at
the connector end.
* Resets provided for up to 4 independant
CPU's using a segmented backplane
Rear Panel Details
20 Plug-in
card slots
Knockouts for 1 SCSI connector
Cooling
Four hot swap 90mm 51CFM fans
Positive chassis pressure
30PPI filter installed
Fan Options: thermister regulated fan speed
Alarm Board
Fan
operation
Chassis temperature
Redundant power supply failure
Power Supply
Not included.
Front mounted redundant style.
AC Input - Zippy RAH and RHH form factor
Optional 12, 24 or 48VDC supplies available
Chassis Plans is more than a chassis
supplier. We offer a complete product
line including the latest motherboards,
drives, video boards and plug-in cards
including analog/digital I/O cards.
Integrating today's complex systems
can be a challenge. Allow us to provide
you with a professionally integrated
system with the OS loaded and the system
tested and burned-in as a complete unit.
We stand behind our work 100%.
